NXP Semiconductors

• imx8mm_evk
  • Quick Start
  • Get and Build the ARM Trusted firmware
  • Get the ddr firmware
  • Build U-Boot for sd card
  • Boot
  • Build U-Boot for qspi flash card
  • Boot from QSPI Flash
• imx8mn_evk
  • Quick Start
  • Get and Build the ARM Trusted firmware
  • Get the ddr firmware
  • Build U-Boot
  • Boot
• imx8mp_evk
  • Quick Start
  • Get and Build the ARM Trusted firmware
  • Get the ddr firmware
  • Build U-Boot
  • Boot
• imx8mq_evk
  • Quick Start
  • Get and Build the ARM Trusted firmware
  • Get the ddr and hdmi firmware
  • Build U-Boot
  • Boot
• imx8qxp_mek
  • Quick Start
  • Get and Build the ARM Trusted firmware
  • Get scfw_tcm.bin and ahab-container.img
  • Build U-Boot
  • Flash the binary into the SD card
  • Boot
• imxrt1020-evk
  • How to use U-Boot on NXP i.MXRT1020 EVK
• imxrt1050-evk
  • How to use U-Boot on NXP i.MXRT1050 EVK
• LS1046ARDB
  • LS1046A SoC Overview
  • LS1046ARDB board Overview
  • Memory map from core’s view
  • QSPI flash map
  • Booting Options
  • Debug UART
• mx6sabreauto
  • How to use and build U-Boot on mx6sabreauto
  • Booting via Falcon mode
• mx6sabresd
  • How to use and build U-Boot on mx6sabresd
  • 1. Booting from SD card via SPL
  • 2. Booting from eMMC
  • 3. Booting via Falcon mode
• mx6ul_14x14_evk
  • How to use U-Boot on Freescale MX6UL 14x14 EVK
  • 1. Booting via SDCard
  • 2. Booting via Serial Download Protocol (SDP)
• mx6ullevk
  • How to use U-Boot on Freescale MX6ULL 14x14 EVK
• i.MX7D/i.MX8MM SRC_GPR10 PERSIST_SECONDARY_BOOT for bootloader A/B switching
  • Introduction
  • Operation
  • Setup
  • References